Dell Precision Workstation 690 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 167

background image

Back to Contents Page

Advanced Features

Dell Precision™ Workstation 690 User's Guide

LegacySelect Technology Control

LegacySelect technology control offers legacy-full, legacy-reduced, or legacy-free solutions based on common platforms, hard-drive images, and help desk

procedures. Control is provided to the administrator through system setup, Dell OpenManage™ IT Assistant, or Dell™ custom factory integration.

LegacySelect allows administrators to electronically activate or deactivate connectors and media devices that include serial and USB connectors, a parallel
connector, a floppy drive, and a PS/2 mouse. Connectors and media devices that are deactivated make resources available. You must restart the computer to
effect the changes.

Manageability

Alert Standard Format

Alert Standard Format (ASF) is a DMTF management standard that specifies "pre-operating system" or "operating system-absent" alerting techniques. The
standard is designed to generate an alert on potential security and fault conditions when the operating system is in a sleep state or the system is powered
down. ASF is designed to supersede previous operating system-absent alerting technologies.

Your computer supports the following ASF alerts:

For more information about Dell's ASF implementation, see the

ASF User's Guide

and the

ASF Administrator's Guide

, which are available on the Dell Support

website at

support.dell.com

.

Dell OpenManage™ IT Assistant

IT Assistant configures, manages, and monitors computers and other devices on a corporate network. IT Assistant manages assets, configurations, events
(alerts), and security for computers equipped with industry-standard management software. It supports instrumentation that conforms to SNMP, DMI, and CIM
industry standards.

Dell OpenManage Client instrumentation, which is based on DMI and CIM, is available for your computer. For information on IT Assistant, see the

Dell

OpenManage IT Assistant User's Guide

available on the Dell Support website at

support.dell.com

.

LegacySelect Technology Control

Manageability

Security

Password Protection

System Setup

Boot Menu

Clearing Forgotten Passwords

Clearing CMOS Settings

Power Management

Hyper-Threading and Dual-Core Technology

IEEE 1394

About RAID Configurations

RAID Configuration Utility

RAID Configuration and Management

Performing Configuration Tasks

Alert

Description

Chassis: Chassis Intrusion - Physical Security Violation/ Chassis Intrusion -

Physical Security Violation Event Cleared

The computer chassis has been opened or the chassis
intrusion alert has been cleared.

Boot: Failure to Boot to BIOS

The BIOS did not complete loading upon initiation.

Password: System Password Violation

The system password is invalid (alert occurs after three failed
attempts).

CPU: CPU DOA Alert/CPU DOA Alert Cleared

The processor is not functioning.

Heartbeats: Entity Presence

Periodic heartbeats have been transmitted to verify system
presence.

Temperature: Generic Critical Temperature Problem

The computer temperature is out of limits.

Voltage: Generic Critical Voltage Problem

The voltage from integrated voltage regulators is out of limits.

Power Supply: Critical Power Supply Problem

The computer power supply voltage is out of limits.

Cooling Device: Generic Critical Fan Failure

The fan speed (rpm) is out of limits.

Connectivity: Ethernet Connectivity Enabled/

Ethernet Connectivity Disabled

The Ethernet connectivity is enabled or the Ethernet
connectivity is disabled.

«
...
6
7
8
9
10
...
»

Содержание Precision Workstation 690








































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Precision Workstation 690

Бренд: iDOT Страницы: 28

Бренд: Panasonic Страницы: 12

Бренд: Panasonic Страницы: 16

Бренд: Panasonic Страницы: 28

Бренд: Panasonic Страницы: 43

Бренд: IBM Страницы: 198

Бренд: IBM Страницы: 32

Бренд: IBM Страницы: 32

Бренд: IBM Страницы: 32

Бренд: IBM Страницы: 46

Бренд: IBM Страницы: 32

Бренд: IBM Страницы: 72

Бренд: Radio Shack Страницы: 52

DECstation 316+

Бренд: DEC Страницы: 94

Rigid-770 Series

Бренд: Arbor Technology Страницы: 119

Бренд: IEI Technology Страницы: 121

Бренд: Vivo Страницы: 4

Бренд: Casio Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды