Dell Precision Workstation 690 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 167

background image

Entering the RAID Configuration Utility

1.

Boot the system.

2.

Press <Ctrl><C> during POST when prompted.
If you wait too long and the operating system logo appears, continue to wait until the operating system completes bootup. Then restart your system
and try again.

The Configuration Utility menu screen displays.

Navigating Within the Configuration Utility

Configuration screens are organized in a hierarchical fashion. Navigational hints are displayed at the bottom of each screen. Online help is also available in this
utility.

RAID Configuration and Management

In order to access any of the integrated RAID (IR) configuration and management screens, select

RAID Properties

on the

Adapter Properties

screen. From

here you can create a new RAID volume and view or manage existing RAID volumes.

l

If no RAID volumes are currently configured, you are prompted to create a RAID virtual disk (a RAID volume).

l

If at least one RAID volume is currently configured, any existing RAID volumes are displayed for management purposes.

Exit Screen

It is important to exit the RAID Configuration Utility properly, because some changes take effect only when you exit. From the

Adapter List

, press <Esc> to

exit. In addition, a similar exit screen appears when you exit most other screens, and it can be used to save settings.

Performing Configuration Tasks

The two options for creating a new RAID volume are

Create IM Volume

and

Create IS Volume

. IM stands for

integrated mirroring

. IS stands for

integrated

striping

. Additional information is available on the configuration screen.

Creating a RAID Level 0 Configuration

Follow these steps to create a RAID 0 volume on a SAS 5/iR controller that does not currently have a RAID volume configured.

1.

Select a controller from the

Adapter List

in the Configuration Utility.

2.

Select the

RAID Properties

option.

3.

Select

Create IS Volume

when you are prompted to create either an IS (striped) RAID volume or an IM (mirrored) RAID volume.

The next screen shows a list of hard drives that can be added to a RAID volume.

4.

Move the cursor to the

RAID Disk

column. To add a hard drive to the RAID volume, change "No" to "Yes" by pressing the <+>, <->, or space bar. As

hard drives are added, the

Virtual Disk Size

field changes to reflect the new size of the RAID volume.

All data will be lost upon creation of the RAID volume. Dell recommends backing up your data before performing these steps.

When creating an IS (striped) RAID volume:

l

All drives must be either Dell compliant SAS or SATA hard drives.

l

SAS and SATA hard drives cannot be used in the same RAID volume.

NOTE:

Dell recommends backing up your data prior to adding or updating configurations.

NOTICE:

You will lose any data on your hard drives when you create a RAID configuration using the following procedures. Back up data that you want

to keep before continuing.

NOTE:

Your RAID array cannot exceed 2 Terabytes in size. Any space beyond the 2-Terabyte limitation will not be usable.

NOTE:

RAID 0 does not provide any data protection in the event of hard drive failure. It is primarily used to increase performance.

NOTE:

Once the number of hard drives in a RAID volume (virtual disk) is set, it cannot be changed.

«
...
21
22
23
24
25
...
»

Содержание Precision Workstation 690








































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Precision Workstation 690

Бренд: IBM Страницы: 717

Бренд: Zenith Страницы: 98

Бренд: Matrox Страницы: 174

Бренд: Packard Bell Страницы: 122

ARP-3800AP-E01 Series

Бренд: Arista Страницы: 54

Бренд: Korg Страницы: 5

ESPRIMO Q5 Series

Бренд: Fujitsu Страницы: 61

Predator PO3-600 E

Бренд: Acer Страницы: 100

Satellite M100 Series

Бренд: Toshiba Страницы: 2

Satellite M100 Series

Бренд: Toshiba Страницы: 283

Бренд: PowerCenter Страницы: 29

Бренд: IPSO Страницы: 41

Thin Client I8520

Бренд: ClearCube Страницы: 2

Бренд: Decision Data Страницы: 162

Бренд: Nvidia Страницы: 105

Бренд: Nvidia Страницы: 120

Бренд: ICOP Technology Страницы: 41

Bugbox Plus UM-017

Бренд: Baker Страницы: 47

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды