manualshive.com logo in svg

Dell PowerVault NX3500, Руководство администратора, Страница: 82 / 218

Поделиться
Скачать
Dell PowerVault NX3500 Скачать руководство пользователя страница 82

82

Monitoring PowerVault NX3500

Clients that use NFS are stateless and are not affected during fail-back. 

Clients that use connection-based protocols (CIFS), may be disconnected 

during fail-back. To optimize the fail-back operation, the system provides you 

with the following policies for migration on recovery, which affect the load-

balance and disconnections:

• Migrate Immediately—Always keep the system well balanced, at the cost 

of possibly disconnecting CIFS clients during work time.

• Migrate Automatically— Always keep the system well balanced if the 

controller failure is very short, at the cost of disconnecting CIFS clients. 

This option causes the system to remain unbalanced for a period of several 

days, if the failure remains for long time.
This mode overcomes short controller failures because clients have not 

created new material during the short time failure. Therefore, the best 

practice is to rebalance them as soon as possible.
If the failure is longer than 10 minutes, the system remains unbalanced 

until you rebalance it manually.

• Migrate Manually— Never migrates clients automatically. This requires 

manual intervention to rebalance the system.
If the system requires manual intervention to rebalance it after fail-over, 

the system sends an appropriate email message to the administrator.
You can configure the fail-back policy, as described above, per protocol and 

LAN or client network.

CIFS Connections

The 

CIFS Connections

 page enables you to monitor current CIFS 

connections. To manage CIFS connections, choose 

Monitor



Load

 

Balancing



CIFS Connections

. The 

CIFS Connection

 page is displayed.

Содержание PowerVault NX3500



























































































































































































































Отзывы:

Нет отзывов