Dell PowerVault NX3500, Руководство администратора, Страница: 47 / 218

Setting Up Your PowerVault NX3500 Solution
47
b
Select Disk Group

Create .
Alternatively, you can right-click the unassigned physical disks, and
select Create Disk Group from the pop-up menu.
– To create a secure disk group:
a
On the Physical tab, select one or more unassigned security capable
physical disks of the same physical disk type.
b
Select Disk Group

Create .
Alternatively, you can right-click the unassigned security capable
physical disks, and select
Create Disk Group
from the pop-up menu.
The
Introduction (Create Disk Group)
window is displayed.
4 Click Next .
The Disk Group Name and Physical Disk Selection window is displayed.
5 Type a name for the disk group in Disk Group Name .
NOTE:
The disk group name should not exceed 30 characters.
6 Select the appropriate Physical Disk Selection choice; you can select:
For manual configuration, the Manual Physical Disk Selection window is
displayed.
•
Automatic , see step 7
For automatic configuration, the RAID Level and Capacity window is
displayed.
•
Manual , see step 10
7
Click
Next
.
8
Select the appropriate RAID level in
Select RAID Level
.
You can select RAID levels 1/10, 6, and 5. Depending on the RAID level
selection, the physical disks available for the selected RAID level are
displayed in the Select Capacity table.
9 In the Select Capacity table, select the relevant disk group capacity, and
click Finish .
Repeat the procedure for a minimum of two disk groups and then proceed
to "Creating Virtual Disks" on page 49.