Dell PowerVault NX3500 Скачать руководство пользователя страница 53

Страница: 53 / 218

Setting Up Your PowerVault NX3500 Solution

The mappings are saved. The

Topology

pane and the

Defined Mappings

pane in the

Mappings

tab are updated to reflect the mappings.

Running the PowerVault NASCU

The PowerVault NAS Configuration Utility (NASCU) walks you through the

steps necessary to set up the network configuration and pair the PowerVault

NX3500 controllers together. It also starts the process of pairing the system to

the PowerVault MD3

0i storage appliance. It is recommended that you

determine your network configuration and IP address allocation for your NAS

controllers before executing this utility. See “Completing the NAS System

Setup Worksheet” on page 42.
Before running the PowerVault NASCU, ensure that:

• The PowerVault NASCU is installed and executed from a management

station that has IPv6 enabled. The utility connects to and configures your

controllers through the local link Ipv6 address. Ipv6 can be disabled, but

only after the installation and configuration is complete.

• The management station is connected to the same switch as the client

connections on your NAS controllers (see Table 2-1).

NOTE:

Use the PowerVault NASCU only for initial configuration. After the PowerVault

NX3500 is configured use the NAS Manager to make changes to the configuration.

Installing the PowerVault NASCU

NOTE:

Do not attempt to use the PowerVault NASCU to reconfigure an already

clustered PowerVault NX3500 solution.

For Windows-based management stations

Insert the

PowerVault NX3500 Resource Media

into the optical drive.

autorun

is enabled on your system, the installer automatically launches

after a few moments.

autorun

is enabled, proceed to step 5.

autorun

is disabled, or if

autorun

does not automatically launch the

installer, open an explorer window and navigate to the optical drive where

the

PowerVault NX3500 Resource Media

is located.

Содержание PowerVault NX3500



























































































































































































































Результаты поиска

Содержание PowerVault NX3500

Отзывы:

Dell PowerVault NX3500, Руководство администратора, Страница: 53 / 218

Результаты поиска

Содержание PowerVault NX3500

Отзывы: