Dell PowerVault NX3500 Скачать руководство пользователя страница 153

Страница: 153 / 218

Maintaining the PowerVault NX3500

153

After completing the Firmware reset stage, select the

File System Reinstall

option from the boot menu.
The reinstall process takes around 20–40 minutes to complete depending

on the configuration.

Attaching the PowerVault NX3500 Controller

Before completing this procedure, verify that the controller being attached is

in standby mode and powered up.
To attach the new controller to the cluster:

Plug-in a USB disk-on-key to the peer controller, and create a configuration

for the new controller by logging in to the CLI on the management IP

address and running the following command:

system maintenance controllers save-conf
<

controllerID

This command saves the system configuration on the USB disk-on-key.

Transfer the disk-on-key to the new controller, and let it run until the

message "ready to be attached/clusterized" (after it configures the network)

is displayed.
The process begins automatically.

NOTE:

Do not remove the USB key until the reconfiguration has occurred.

following command:

system maintenance controllers attach start
<

controllerID

If you get disconnected, to view the progress, log in to the CLI again and

execute the following command:

system maintenance controllers attach status

This process takes some time to complete.

Содержание PowerVault NX3500



























































































































































































































Результаты поиска

Содержание PowerVault NX3500

Отзывы:

Dell PowerVault NX3500, Руководство администратора, Страница: 153 / 218

Результаты поиска

Содержание PowerVault NX3500

Отзывы: