Dell PowerVault NX3500 Скачать руководство пользователя страница 34

Страница: 34 / 218

Setting Up Your PowerVault NX3500 Solution

Figure 2-3. NX3500 Node NIC Cabling

NOTE:

See Figure 2-3 to connect the PowerVault NX3500 and MD ports to the

appropriate switch in the for the best practice solution in the HA option.

Best Practice Solution in the HA Option

The best practice solution is to isolate the SAN traffic from the LAN or client

traffic with redundant switches for HA. All the client cables are split between

the redundant client switches, and the SAN or internal network cables are

split between the redundant SAN switches. Peer connections are always back

to back.

NOTE:

For cabling recommendation for existing MD-Series implementations that

do not have stacked switches, see “Cabling Recommendation” on page 213.

NOTE:

The PowerVault NX3500 solution expects only two subnets (iSCSI ports) per

MD controller to be used by the solution. The other four ports are dedicated to

block devices.

Содержание PowerVault NX3500



























































































































































































































Результаты поиска

Содержание PowerVault NX3500

Отзывы:

Dell PowerVault NX3500, Руководство администратора, Страница: 34 / 218

Результаты поиска

Содержание PowerVault NX3500

Отзывы: