Dell PowerVault NX3500 Скачать руководство пользователя страница 209

Страница: 209 / 218

BPS Alarms

209

BPS Alarms

This chapter provides information about the external alarm conditions of the

Dell backup power supply (BPS).

NOTE:

The Dell BPS LED is solid amber with an audible alarm.

Table A-1. External Alarm Conditions

Alarm

Description

Audible

Corrective Action

Battery

disconnected

Battery voltage is lower

than the batteries

disconnected level

defined for this UPS.

This may be due to a

blown fuse,

intermittent battery

connection, or battery

cable being

disconnected.
If EBMs are attached

this alarm does not

trigger unless the EBMs

are also disconnected

since they are paralleled

with the battery bus.

Beeping

Reconnect the battery by

following the steps in the

Getting Started Guide

Service

battery

A faulted battery string

has been detected and

as a result the battery

charger has been

disabled until it is

replaced.

Beeping

Battery needs to be replaced.

Contact Dell.

Input AC over

voltage

Utility RMS voltage

greater than maximum

valid utility threshold.

Beeping

Check the utility power.

Содержание PowerVault NX3500



























































































































































































































Результаты поиска

Содержание PowerVault NX3500

Отзывы:

Dell PowerVault NX3500, Руководство администратора, Страница: 209 / 218

Результаты поиска

Содержание PowerVault NX3500

Отзывы: