Dell PowerVault NX3500 Скачать руководство пользователя страница 157

Страница: 157 / 218

Troubleshooting

157

CIFS Client Disconnection on File Read

CIFS Client General Disconnection

CIFS Client Login Failure

CIFS Connection Failure

Description

CIFS client disconnection on file read.

Cause

Extreme CIFS workload during controller failover.

Workaround

Client needs to reconnect and open the file again.

Description

CIFS client disconnection.

Cause

In case the system identified a general issue with the CIFS service,

it automatically recovers but the failure causes all users to be

disconnected and the above event to be triggered.

Workaround

If this issue repeats frequently, contact Dell.

Description

CIFS client login failure.

Cause

User supplied wrong password upon connection.

Workaround

Interactive users can retry with correct password. Applications and

servers might need special attention as the user/password, which is

usually set in a script or configuration file, has probably expired.

Description

CIFS client share access denied.

Cause

The user is unknown in the Active Directory server, and the NAS

system mapped this user to a guest user. If the share does not allow

guest access, the user receives an access denied alert.

Workaround

Ensure that the user is listed in the Active Directory server the

NAS is using. Alternatively, you can remove the guest limitation for

the share. If the user can now access the share as guest, the newly

created files are owned by the nobody/guest user.

Содержание PowerVault NX3500



























































































































































































































Результаты поиска

Содержание PowerVault NX3500

Отзывы:

Dell PowerVault NX3500, Руководство администратора, Страница: 157 / 218

Результаты поиска

Содержание PowerVault NX3500

Отзывы: