Dell PowerVault MD3600f Series, Руководство по интерфейсу командной строки

Страница: 35 / 328

About the Script Commands
35
download
object
{ statement-data }
Transfers data to the storage array or hardware
associated with the storage array.
enable object
{ statement-data }
Allows a feature to operate.
recopy object
{ statement-data }
Restarts a virtual disk copy operation by using an
existing virtual disk copy pair. You can change
attributes before the operation is restarted.
recover object
{ statement-data }
Re-creates an object from saved configuration data
and the statement attributes (similar to the create
command).
recreate object
{ statement-data }
Restarts a snapshot operation using an existing
snapshot virtual disk. You can change attributes
before the operation is restarted.
remove object
{ statement-data }
Removes a relationship from between objects.
repair
object
{
statement-data
} Repairs errors found by the
check
command.
reset object { statement-data } Returns the hardware or object to an initial state.
resume object Starts a suspended operation. The operation begins
where it left off when suspended.
revive object Forces the object from the Failed to the Optimal
state. Use only as part of an error recovery procedure.
save object { statement-data } Writes information about the object to a file.
set object { statement-data } Changes object attributes. All changes are completed
when the command returns.
show object { statement-data } Displays information about the object.
start object { statement-data } Starts an asynchronous operation. You can stop some
operations after they have started. You can query the
progress of some operations.
stop object { statement-data } Stops an asynchronous operation.
suspend object
{
statement-data
}
Suspends an operation. You can then restart the
suspended operation, and it continues from the point
at which it was suspended.
Table 2-3. General Form of the Script Commands
(continued)
Command Syntax Description
book.book Page 35 Wednesday, June 8, 2011 12:20 PM