Dell PowerVault MD3600f Series, Руководство по интерфейсу командной строки, Страница: 34 / 328

34
About the Script Commands
Statement data is in the form of attribute=value (such as raidLevel=5 ), an
attribute name (such as batteryInstallDate ), or an operation name (such as
consistencyCheck ).
Script Command Synopsis
Because you can use the script commands to define and manage the different
aspects of a storage array (such as host topology, physical disk configuration,
RAID controller module configuration, virtual disk definitions, and disk
group definitions), the actual number of commands is extensive. The
commands, however, fall into general categories that are reused when you
apply the commands to the different aspects of a storage array.
Table 2-3 lists the general form of the script commands and provides a
definition of each command.
Table 2-3. General Form of the Script Commands
Command Syntax Description
activate
object
{
statement-data
}
Sets up the environment so that an operation can
take place or performs the operation if the
environment is already correctly set up.
autoConfigure
storageArray { statement-data }
Automatically creates a configuration based on
parameters specified in the command.
check object { statement - data } Starts a synchronous operation to report on errors in
the object.
clear object { statement-data } Discards the contents of some attribute of an object.
This is a destructive operation that cannot be
reversed.
create object { statement-data } Creates an object of the specified type.
deactivate object
{ statement-data }
Removes the environment for an operation.
delete object Deletes a previously created object.
diagnose object
{ statement-data }
Runs a test and displays the results.
disable object
{
statement-data
}
Prevents a feature from operating.
book.book Page 34 Wednesday, June 8, 2011 12:20 PM