background image

Script Commands

199

You can schedule downloads for multiple physical disks at the same time, 

including multiple physical disks in a redundant disk group. Each firmware 

image file contains information about the physical disk types on which the 

firmware image runs. The specified firmware images can be downloaded only 

to a compatible physical disk. Use the download 

physicalDisk firmware

 

command to download a firmware image to a specific physical disk.
The download storageArray physicalDiskFirmware command blocks all I/ O 

activity until a download try has been made for each candidate physical disk 

or you run the 

stop storageArray downloadPhysicalDiskFirmware

 command. 

When the 

download storageArray physicalDiskFirmware

 command finishes 

downloading the firmware image, each candidate physical disk shows the 

download status for each physical disk. One of these statuses is returned:

• Successful
• Unsuccessful With Reason
• Never Attempted With Reason

Download Storage Array NVSRAM

This command downloads NVSRAM values for the storage array RAID 

controller module.

Syntax

download storageArray NVSRAM file="

filename

"

Parameter

Enable Disk Group Security

This command converts a non-secure disk group to a secure disk group.

Parameter

Description

file

File path and name of the file that 

contains the NVSRAM values. Valid file 

names must end with a 

.dlp

 extension. 

You must put quotation marks (" ") 

around the file name.

book.book  Page 199  Wednesday, June 8, 2011  12:20 PM

Содержание PowerVault MD3600f Series









































































































































































































































































































































Отзывы: