Chapter 4 - Operation
either have an interface card or a terminator. Terminators are comprised of termination resistors, which
are used to mark the beginning and end of a trunk segment and Tap Dummy Load (TDL) which
terminate a drop cable when no node is present. The model number for the ControlNet Universal
Interface is TC-PCIC02-100.
The following image displays the PCIC card used by Honeywell.
TC-PCIC02: This is a universal PCIC card.
Figure 4.3 PCIC Card
ATTENTION
TC-PCIC02: Controlnet Network interface can be connected toDell PowerEdge R330XL
serverusing Magma PCIe to PCI converter. For more information on “How to connect using
Magma Converter” refer to the Magma PE3R Installation Instructions available at the following
Honeywell Process Solutions support website.
4.3
Configuring ControlNet interface card
You can configure a ControlNet interface card using the Magma PE3R PCie to PCI converter box.
1. For more information on the Magma PE3R PCie to PCI converter box, log into
.
2. Enter your user name and password.
3. Go to the Product Support section.
4. Search for Magma PE3R instructions.
l
Installing ControlNet card inside Magma chassis
4.3.1
Installing ControlNet card inside Magma chassis
Refer to the Magma PE3R Installation Instruction available at the following Honeywell Process
Solutions support website before installing the third party hardware cards inside Magma chassis.
- 36 -
