Chapter 3 - Installation
Height option
Part
Part number
Tab number
1U
Blank front panel
Air duct baffle
51201248
51303521
-100
-100
2U
Blank front panel
Air duct baffle
51201248
51303521
-200
-200
3U
Blank front panel
Air duct baffle
51201248
51303521
-300
-300
4U
Blank front panel
Air duct baffle
51201248
51303521
-400
-400
3.4
Installing the server and connecting the cables
This section describes the procedures for installing and cabling the server in a one-meter deep
Honeywell cabinet with model number MP-C1MCB1. This procedure assumes that a new one-meter
deep equipment cabinet, Honeywell model number MP-C1MCB1, was shipped from the Honeywell
factory with pre-assembled “Sliding Ready Rails”. The Sliding Ready Rails II kit and 1U Cable
Management Arm kit are included with the purchase of Honeywell part number 51156309-100 (Model
No. MZ-PCSV63).
l
Honeywell server back panel connections
l
l
l
Install air duct baffles and blank panel front covers in cabinet
3.4.1
Honeywell server back panel connections
The figure in this section illustrates the back panel of the server and identifies the connectors for all
devices.
Figure 3.1 Server Back Panel Connections
3.4.2
Installing the server
To install the server
- 28 -