2.4
LCN node slot requirements
NOTE
LCN support is not available for Dell PowerEdge R330XL server.
2.5
Experion nodes slot requirement
Default configurations for FTE
l
Broadcom on-board NICs are enabled without PXE.
l
If you are using FTE slot only, then use on-board NICs.
l
l
Cnet configuration using PCIC interface
2.5.1
FTE supervisory (Default)
FTE must be configured on on-board NIC.
Slot number
Description
Option
Slot 1
PCIe Slot Gen 3
-
Slot 2
PCIe Slot Gen 3
-
2.5.2
Cnet configuration using PCIC interface
The server does not support PCIC interface, you must use Magma PCIe to PCI converter box.
Slot number
Description
Option
Slot 1
PCI Slot Gen 3
Magma Host Card
Slot 2
PCI Slot Gen 3
-
2.6
Memory configuration for Dell R330XL
Standard memory for Dell PowerEdge R330XL server server is Tab 100: 8GB (2x4GB) UDIMM
2133MHz or faster and Tab 200:16GB(2x8GB) UDIMM, 2133MHz or faster, and it must be installed in
pairs The label on the outside of the shipping container shall identify the capacity of the memory
installed.
Memory Expansion Model number: Honeywell uses this number as an identity to indicate the supplier
as to what memory must be added with the platform.
Honeywell model number
Description
MZ-PCEM36
MZ-PCEM38
4GB ECC DDR4 UDIMM 2133 MHz or faster
8GB ECC DDR4 UDIMM, 2133MHz or faster
- 14 -
Chapter 2 - Planning