Error Code
Message Information
Action
Cycle input power, update component drivers, if device is
removable, reinstall the device.
PCI1360
Message
A bus fatal error was detected on a component at slot
<
number
>.
Details
System performance may be degraded, or system may fail to
operate.
Action
Cycle input power, update component drivers, if device is
removable, reinstall the device.
PST0128
Message
No memory is detected.
Details
System BIOS was unable to detect memory in the system.
Action
Re-seat the memory modules. If the issue persists, see
Getting Help
.
PST0129
Message
Memory is detected, but is not configurable.
Details
System BIOS detected memory, but was unable to configure
the memory for system operation.
Action
Compare system memory installation to supported system
memory configurations.
RFM1008
Message
Failure detected on Removable Flash Media <
name
>.
Details
An error was reported during a SD card read or write.
Action
Reseat the flash media. If the problem persists, see
Getting
Help
.
RFM1014
Message
Removable Flash Media <
name
> is write protected.
Details
The card is write-protected by the physical latch on the SD
card. A write-protected card cannot be used.
Action
If unintended, remove the media and disable write
protection.
SEC0031
Message
The chassis is open while the power is on.
Details
The chassis is open. System performance may be degraded,
and security may be compromised.
Action
Close the chassis. Check system logs.
89
Содержание PowerEdge R220
Страница 1: ...Dell PowerEdge R220 Owner s Manual Regulatory Model E10S Regulatory Type E10S003 ...
Страница 81: ...81 ...
Страница 93: ...93 ...