Dell PowerEdge R220 Скачать руководство пользователя страница 7

Страница: 7 / 93

About Your System

Front-Panel Features And Indicators

Figure 1. Front-Panel Features and Indicators

Item

Indicator, Button, or

Connector

Icon

Description

Power-on indicator,
power button

The power-on indicator lights when the system
power is on. The power button controls the power
supply output to the system.

NOTE: On ACPI-compliant operating systems,
turning off the system using the power button
causes the system to perform a graceful
shutdown before power to the system is
turned off.

NMI button

Used to troubleshoot software and device driver

errors when running certain operating systems.

This button can be pressed using the end of a

paper clip.

Use this button only if directed to do so by

qualified support personnel or if the information is

provided in the operating system documentation.

Video connector

Allows you to connect a VGA display to the system.

Health indicator

If the system is on, and in good health, the
indicator lights solid blue.
The indicator blinks amber if the system is on or in

standby, and any error exists (for example, a failed

fan or hard drive).

Содержание PowerEdge R220






























































































Результаты поиска

Содержание PowerEdge R220

Отзывы:

Похожие инструкции для PowerEdge R220

Бренды по названию

Популярные бренды

Dell PowerEdge R220, Руководство пользователя

Результаты поиска

Содержание PowerEdge R220

Отзывы:

Похожие инструкции для PowerEdge R220

Бренды по названию

Популярные бренды