Dell PowerEdge E31S Series Скачать руководство пользователя страница 57

Страница: 57 / 202

Option

Description

Embedded Video
Controller

Enables or disables the

Embedded Video Controller

option. This option is set to

Enabled

by default.

Current State of
Embedded Video
Controller

Displays the current state of the embedded video controller. The

Current State of Embedded Video

Controller

option is a read-only field. If the Embedded Video Controller is the only display capability in the

system (that is, no add-in graphics card is installed), then the Embedded Video Controller is automatically
used as the primary display even if the

Embedded Video Controller

setting is set to

Disabled

SR-IOV Global
Enable

Enables or disables the BIOS configuration of Single Root I/O Virtualization (SR-IOV) devices. This option
is set to

Disabled

by default.

OS Watchdog
Timer

If your system stops responding, this watchdog timer aids in the recovery of your operating system.
When this option is set to

Enabled

, the operating system initializes the timer. When this option is set to

Disabled

(the default), the timer does not have any effect on the system.

Memory Mapped
I/O above 4 GB

Enables or disables the support for PCIe devices that need large amounts of memory. This option is set to

Enabled

by default.

Slot Disablement

Enables or disables the available PCIe slots on your system. The slot disablement feature controls the
configuration of PCIe cards installed in the specified slot. Slots must be disabled only when the installed
peripheral card prevents booting into the operating system or causes delays in system startup. If the slot
is disabled, both the Option ROM and UEFI drivers are disabled.

Slot Bifurcation

Enables you to control the bifurcation of the specified slot. Only slots that are present in your system are
available for control.

The configuration for a x16 slot is default (x16), x8x8, or x4x4x4x4.

The configuration for a x8 slot is default (x8) or x4x4.

Slots

Description

Slot 1 Bifurcation

Controls the bifurcation of PCIe cards installed in the specified slot.

●

When set to default, the slot operates at the default bifurcation for that slot.

●

When set to x4x4 the slot bifurcates to two links.

Slot 2 Bifurcation

Controls the bifurcation of PCIe cards installed in the specified slot.

●

When set to default, the slot operates at the default bifurcation for that slot.

●

When set to x4x4 the slot bifurcates to two links.

Slot 3 Bifurcation

Controls the bifurcation of PCIe cards installed in the specified slot.

●

When set to default, the slot operates at the default bifurcation for that slot.

●

When set to x4x4 the slot bifurcates to two links.

Slot 4 Bifurcation

Controls the bifurcation of PCIe cards installed in the specified slot.

●

When set to default, the slot operates at the default bifurcation for that slot.

●

When set to x8x8 or x4x4x4x4, the slot bifurcates to either two or four links
depending on the slot capability.

Slot 5
Bifurcation

Controls the bifurcation of PCIe cards installed in the specified slot.

●

When set to default, the slot operates at the default bifurcation for that slot.

●

When set to x4x4 the slot bifurcates to two links.

Slot 6 Bifurcation

Controls the bifurcation of PCIe cards installed in the specified slot.

NOTE:

This slot bifurcation is supported only in six slot systems.

●

When set to default, the slot operates at the default bifurcation for that slot.

●

When set to x8x8 or x4x4x4x4, the slot bifurcates to either two or four links
depending on the slot capability.

NOTE:

This slot bifurcation is supported only in seven slot systems.

●

When set to default, the slot operates at the default bifurcation for that slot.

●

When set to x4x4 the slot bifurcates to two links.

Pre-operating system management applications

Содержание PowerEdge E31S Series











































































































































































































Результаты поиска

Содержание PowerEdge E31S Series

Отзывы:

Похожие инструкции для PowerEdge E31S Series

Бренды по названию

Популярные бренды

Dell PowerEdge E31S Series, Руководство пользователя

Результаты поиска

Содержание PowerEdge E31S Series

Отзывы:

Похожие инструкции для PowerEdge E31S Series

Бренды по названию

Популярные бренды