2. If applicable, remove the tape backup unit blank by pressing the release tab and sliding the tape backup unit blank out of the
chassis.
3. Slide the tape backup unit into the slot until it snaps into place.
4. Connect the power and data cables to the back of the drive and the system board.
Figure 110. Installing the tape backup unit
a. tape backup unit
b. tape backup unit slot
c. release tab
Next steps
Follow the procedure listed in the After working inside your system section.
Related references
on page 66
Related tasks
Before working inside your system
on page 67
After working inside your system
on page 67
Optical drive (optional)
Optical drives retrieve and store data on optical discs such as CD and DVD. Optical drives can be categorized into two basic
types: optical disc readers and optical disc writers.
Removing the optical drive
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
170
Installing and removing system components
