manualshive.com logo in svg

Dell PowerEdge 5/E, Руководство пользователя

Поделиться
Скачать
Dell PowerEdge 5/E Скачать руководство пользователя страница 81

Troubleshooting

79

LED Behavior Patterns

The external SAS ports on the PERC 5/E Adapter have a port status LED per x4 SAS port. This bi-color 
LED displays the status of any external SAS port. The LED indicates whether all links are functional or 
only partial links are functional. Table 6-7 describes the patterns for the port status. 

Audible Alarm Warnings

An audible alarm is available on the PERC 5/E Adapter to alert you of key critical and warning events 
involving the virtual disk or physical disk problems. You can use the Basic Input/Output System (BIOS) 
Configuration Utility to enable, disable, or silence the on-board alarm tone.

 

NOTE: 

Silencing the alarm stops only the current alarm, but future alarms will be sounded. To permanently disable 

the alarm, select the 

disable alarm

 option.

smartd[smartd[2338] 
Device: /dev/sda, Bad 
IEC (SMART) mode 
page, err=-5, skip 
device

smartd[2338] Unable 
to register SCSI 
device /dev/sda at 
line 1 of file 
/etc/smartd.conf

These error messages are caused by an unsupported command coming directly 
from the user application. This is a known issue in which user applications try to 
direct Command Descriptor Blocks to RAID volumes. This error message has no 
effect on the user and there is no loss of functionality due to this error.

The 

Mode Sense/Select

 command is supported by firmware on the PERC 5. 

However, the Linux kernel 

daemon

 is issuing the command to the virtual disk 

instead of to the driver IOCTL node. This action is not supported.

Table 6-7.

LED Behavior Patterns

Port State

LED State

Power-on state

Off

Reset state

Off

All links in port connected

Green light on

One or more links are not connected (applicable only in wide port configurations) Amber light on

All links in the port are disconnected or the cable is disconnected

Off

Table 6-6.

Linux Operating System Error 

(continued)

Error Message

Suggested Solution

Dell_PERC5_UG.book  Page 79  Tuesday, February 13, 2007  6:02 PM

Содержание PowerEdge 5/E

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды