Dell PowerConnect W-IAP3WN, Руководство пользователя

Страница: 48 / 246

48
| Wireless Network
Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0
| User Guide
You want to use the default security level,
Personal
Perform the following steps:
1.
Select the required key options from the
Key management
drop-down
list. Available options are:
 WPA-2 Personal
 WPA Personal
 Both (WPA-2 & WPA)
 Static WEP
If you have selected
Static WEP
, do the following:
 Select appropriate
WEP key size
from the WEP key size drop-down
list. Available options are 64-bit and 128-bit.
 Select appropriate Tx key from the
Tx Key
drop-down list. Available
options are 1, 2, 3,and 4.
 Enter an appropriate WEP key and reconfirm.
For more information on encryption and recommended
encryption type, see
Chapter 11, “Encryption” .
2.
WPA-2 Personal
— Select a passphrase format from the Passphrase
format drop-down list. Available options are:
 8-63 alphanumeric chars
 64 hexadecimal chars
3. Enter a passphrase in the Passphrase text box and reconfirm.
4. Select the required option from the MAC authentication drop-down
list. Available options are
 Enabled and Disabled
When
Enabled
, user must configure at least one RADIUS server for
authentication server. See “MAC Authentication” on page 127 for further
details.
5.
Authentication server 1—
Select the required Authentication server
option from the drop-down list. Available options are:

New
— If you select this option, an external radius server has to be
configured to authenticate the users. For information on configuring
an external RADIUS server, see
Chapter 10, “Authentication” .
6.
Reauth interval—
When set to a value greater than zero, the Access
Points will periodically reauthenticate all associated and
authenticated clients.
7. Blacklisting—
Select
Enabled
if you want clients to be blacklisted
after a certain number of authentication failures.
8. Max authentication failures—
Users who fail to authenticate the
number of times specified here will be dynamically blacklisted. The
maximum value for this entry is 10.
9. InternalServer
— If you select this option, users who are required to
authenticate with the internal RADIUS server must be added. Click
the
Users
link to add the users.For information on adding a user, see
“Adding a User” on page 235 .
NOTE:
Navigate to
PEF > Blacklisting
in the WebUI to specify the duration
of the blacklisting on the Blacklisting tab of the PEF window.
10. Click
Upload Certificate
and browse to upload a certificate file for the
internal server. See “Certificates” on page 129 for more information.
Table 6
Conditions for Adding an Employee Network— Security Tab (Continued)
If then,