Dell PowerConnect W-IAP3WN, Руководство пользователя

Страница: 167 / 246

Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0
| User Guide Intrusion Detection System |
167
The following table describes the detection policies that are enabled in Client Detection Custom settings field.
High  Detect AP Impersonation
 Detect Adhoc Networks
 Detect Valid SSID Misuse
 Detect Wireless Bridge
 Detect 802.11 40MHz intolerance settings
 Detect Active 802.11n Greenfield Mode
 Detect AP Flood Attack
 Detect Client Flood Attack
 Detect Bad WEP
 Detect CTS Rate Anomaly
 Detect RTS Rate Anomaly
 Detect Invalid Address Combination
 Detect Malformed Frame— HT IE
 Detect Malformed Frame— Association Request
 Detect Malformed Frame— Auth
 Detect Overflow IE
 Detect Overflow EAPOL Key
 Detect Beacon Wrong Channel
 Detect devices with invalid MAC OUI
Table 27
Client Detection Policies
Detection Level Detection Policy
Off All detection policies are disabled.
Low

Detect Valid Station Mis association
Medium  Detect Disconnect Station Attack
 Detect Omerta Attack
 Detect FATA-Jack Attack
 Detect Block ACK DOS
 Detect Hotspotter Attack
 Detect unencrypted Valid Client
 Detect Power Save DOS Attack
High

Detect EAP Rate Anomaly

Detect Rate Anomaly

Detect Chop Chop Attack

Detect TKIP Replay Attack

IDS Signature— Air Jack

IDS Signature— ASLEAP
Table 26
Infrastructure Detection Policies (Continued)
Detection Level Detection Policy