Dell PowerConnect W-IAP3WN, Руководство пользователя

Страница: 163 / 246

Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0
| User Guide Adaptive Radio Management |
163
5. Select Administrator assigned in 2.4 GHz and 5 GHz band sections.
6. Select appropriate channel number from the Channel drop-down list for both 2.4 GHz and 5 GHz band
sections.
7. Enter appropriate transmit power value in the Transmit power text box in 2.4 GHz and 5 GHz band sections.
8. Click OK.
Configuring Radio Profiles in Instant
Dell Instant supports radio profile configuration. The radio settings are available for both the 2.4-GHz and the 5-
GHz radio profiles. You can configure the radios separately, using the parameters described in table on each
radio.
Use the following procedure to configure Instant’s radio attributes for the 2.4GHz and 5GHz frequency bands.
Figure 137
Radio Profile
1. Navigate to RF which is at the top right corner of the WebUI.
2. Click
Show advanced options
to view the
Radio
tab.
3. Refer to the table below to configure the radio settings for bands 2.4GHz and 5GHz.
Monitor Enabled AP does not provide access service to clients.
Table 25
Radio Profile Configuration Parameters
Parameter Description
Legacy only Enable to run the radio in non-802.11n mode.
This is disabled by default.
802.11d / 802.11h Enable the radio to advertise its 802.11d (Country Information) and 802.11h (Transmit
Power Control) capabilities.
This is disabled by default.
Table 24
Mode, Spectrum and AP Operation (Continued)
Mode Spectrum AP Operation