Dell PowerConnect W-IAP3WN, Руководство пользователя

Страница: 204 / 246

204
| Monitoring
Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0
| User Guide
Figure 177
Throughput Graph
For more information about the graphs in the network view and for monitoring procedures, see Table 38 .
Instant Access Point View
All IAPs in the Dell Instant network are listed in the Access Points tab. Click the IAP that you want to monitor.
Access Point view for that IAP appears.
Similar to the Virtual Controller view, the Access Point view also has three tabs— Networks, Access Points, and
Clients.
The following sections in the Instant UI provide information about the selected IAP:

Info

RF Dashboard
Table 38
Network View — Graphs and Monitoring Procedures
Graph Name Description Monitoring Procedure
Clients The Clients graph shows the number of clients
associated with the network for the last 15 minutes.
To see an enlarged view, click the graph.

The enlarged view provides Last, Minimum,
Maximum, and Average statistics for the number
of clients associated with the Virtual Controller for
the last 15 minutes.

To see the exact number of clients in the Dell
Instant network at a particular time, hover the
cursor over the graph line.
To check the number of clients associated with the
network for the last 15 minutes,
1.
Log in to the Instant UI. The Virtual Controller
view appears. This is the default view.
2. In the
Networks
tab, click the network for
which you want to check the client
association. The Network view appears.
3. Study the Clients graph in the
Usage Trends
pane. For example, the graph on the left shows
that one client is associated with the selected
network at 12:00 hours
Throughput The Throughput graph shows the throughput of the
selected network for the last 15 minutes.
 Outgoing traffic — Throughput for outgoing traffic
is displayed in green. Outgoing traffic is shown
above the median line.
 Incoming traffic — Throughput for incoming
traffic is displayed in blue. Incoming traffic is
shown below the median line.
To see an enlarged view, click the graph.
 The enlarged view provides Last, Minimum,
Maximum, and Average statistics for the incoming
and outgoing traffic throughput of the network for
the last 15 minutes.
To see the exact throughput of the selected network at
a particular time, hover the cursor over the graph line.
To check the throughput of the selected network
for the last 15 minutes,
1.
Log in to the Instant UI. The Virtual Controller
view appears. This is the default view.
2. In the
Networks
tab, click the network for
which you want to check the client
association. The Network view appears.
3. Study the Throughput graph in the
Usage
Trends
pane. For example, the graph on the left
shows 22.0 kbps incoming traffic throughput
for the selected network at 12:03 hours.