Dell PowerConnect W-IAP3WN, Руководство пользователя

Страница: 202 / 246

202
| Monitoring
Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0
| User Guide
Client Alerts Link
For information about the Client Alerts link, see “Clients Tab” on page 21 and Chapter 25, “Alert Types and
Management” chapters.
IDS Link
For information about the IDS link, see “IDS” on page 40 .
Network View
All Wi-Fi networks in the Dell Instant network are listed in the Networks tab. Click the network that you want to
monitor. Network View for the selected network appears.
Similar to the Virtual Controller view, the Network view also has three tabs— Networks, Access Points, and
Clients.
The following sections in the Instant UI, provide information about the selected network:

Info

Usage Trends
Throughput The Throughput graph shows the throughput of all
networks and IAPs associated with the Virtual
Controller for the last 15 minutes.
 Outgoing traffic — Throughput for outgoing traffic
is displayed in green. Outgoing traffic is shown
above the median line.
 Incoming traffic — Throughput for incoming
traffic is displayed in blue. Incoming traffic is
shown below the median line.
To see an enlarged view, click the graph.
 The enlarged view provides Last, Minimum,
Maximum, and Average statistics for the incoming
and outgoing traffic throughput of the Virtual
Controller for the last 15 minutes.
To see the exact throughput of the Dell Instant
network at a particular time, hover the cursor over the
graph line.
To check the throughput of the networks and IAPs
associated with the Virtual Controller for the last 15
minutes,
1.
Log in to the Instant UI. The Virtual Controller
view appears. This is the default view.
2. Study the Throughput graph in the
Usage
Trends
pane. For example, the graph on the left
shows 2.0 kbps outgoing traffic throughput at
12:00 hours. It also shows some incoming
traffic throughput at the same time.
Table 37
Virtual Controller View — Graphs and Monitoring Procedures (Continued)
Graph Name Description Monitoring Procedure