Dell PowerConnect 6224, Руководство по интерфейсу командной строки

Страница: 1115 / 1372

Configuration and Image File Commands
1115
The entire copying process may take several minutes and differs from
protocol to protocol and from network to network.
Understanding Invalid Combinations of Source and Destination
Some combinations of source and destination are not valid. Specifically, if the
following conditions exist, you can not use the copy command:
• If the source file and destination file are defined to be the same.
•
xmodem cannot be a source and destination for the same copy operation.
xmodem can only be copied to image .
• tftp cannot be the source and destination for the same copy operation.
The following topics contain copy character descriptions.
Copying Image File from a Server to Flash Memory
Use the copy source-url image command to copy an image file from a server
to flash memory Use the boot system command to activate the new image.
Copying a Configuration File from a Server to the Running Configuration
Use the copy source-url running-config command to load a configuration file
from a network server to the device running configuration. The configuration
is added to the running configuration as if the commands were typed in the
command-line interface (CLI). The resulting configuration file is a
combination of the previous running configuration and the loaded
configuration file, with the loaded configuration file having precedence.
Copying a Configuration File from a Server to the Startup Configuration
Use the copy source-url startup-config command to copy a configuration file
from a network server to the device startup configuration. These commands
replace the startup configuration file with the copied configuration file.
Storing the Running or Startup Configuration on a Server
Use the copy running-config destination-url command to copy the current
configuration file to a network server using TFTP. Use the copy startup-
config destination-url command to copy the startup configuration file to a
network server.
The configuration file copy can serve as a backup copy.