Dell PowerConnect 6224, Руководство по интерфейсу командной строки

Страница: 1046 / 1372

1046
Virtual Router Redundancy Protocol Commands
console(config-if-vlan15)#ip vrrp 5 timers advertise
10
ip vrrp track interface
Use the ip vrrp track interface command to alter the priority of the VRRP
router based on the availability of its interfaces. It is useful for tracking
interfaces that are not configured for VRRP. Only IP interfaces are tracked. A
tracked interface is up if IP on that interface is up. Otherwise, the tracked
interface is down.
When the tracked interface is down or the interface has been removed from
the router, the priority of the VRRP router will be decremented by the value
specified in priority argument. When the interface is up for IP protocol the
priority will be incremented by the priority value.
A VRRP configured interface can track more than one interface. When a
tracked interface goes down, then the priority of the router will be decreased
by 10 (default priority decrement) for each downed interface. The default
priority decrement is changed using the priority argument. The default
priority of the virtual router is 100, and the default decrement priority is 10.
By default no interfaces are tracked. If we specify just the interface to be
tracked without giving the priority, which is optional, then the default priority
will be set.
Use the no form of this command to remove the interface from the tracked
list or to restore the priority decrement to its default. When removing an
interface from the tracked list, the priority is incremented by the decrement
value if that interface is down.
Syntax
ip vrrp vrid track interface vlan
vlan-id
[ decrement
priority
]
vrid
—Virtual router identification (Range: 1–255).
vlan
vlan-id
—Valid VLAN ID.
priority
—Priority decrement value for the tracked interface (Range: 1–254).
Default Configuration
No interfaces are tracked.