Dell OptiPlex 320 DCNE Скачать руководство пользователя страница 19

Страница: 19 / 176

Advanced Features: Dell OptiPlex 320 User's Guide

file:///N|/For_lekha/For%20Deepa/Nadia/UG/A00/en/nadia-temp-working-jul19/Nadia_UG_A00/Output/advfeat.htm[5/22/2015 10:43:10 AM]

Back to Contents Page

Advanced Features

Dell™ OptiPlex™ 320 User's Guide

LegacySelect Technology Control

Booting to a USB Device

Clearing Forgotten Passwords

Clearing CMOS Settings

Hyper-Threading

Power Management

LegacySelect Technology Control

LegacySelect technology control offers legacy-full, legacy-reduced, or legacy-free solutions based on common platforms,

hard-drive images, and help desk procedures. Control is provided to the administrator through system setup, Dell

OpenManage™ IT Assistant, or Dell custom factory integration.

LegacySelect allows administrators to electronically activate or deactivate connectors and media devices that include serial

and USB connectors, a parallel connector, a floppy drive, PCI slots, and PS/2 devices. Deactivating connectors and media

devices makes resources available for other applications. You must restart the computer to effect the changes.

Manageability

Dell OpenManage™ IT Assistant

IT Assistant configures, manages, and monitors computers and other devices on a corporate network. IT Assistant manages

assets, configurations, events (alerts), and security for computers equipped with industry-standard management software. It

supports instrumentation that conforms to SNMP, DMI, and CIM industry standards.

Dell OpenManage Client instrumentation, which is based on DMI and CIM, is available for your computer. For information on

IT Assistant, see the

Dell OpenManage IT Assistant User's Guide

available on the Dell Support website at

support.dell.com

Dell OpenManage Client Instrumentation

Dell OpenManage Client Instrumentation is software that enables remote management programs such as IT Assistant to do

the following:

Access information about your computer, such as how many processors it has and what operating system it is running.

Monitor the status of your computer, such as listening for thermal alerts from temperature probes or hard-drive failure

alerts from storage devices.

Change the state of your computer, such as updating its BIOS or shutting it down remotely.

A managed system is one that has Dell OpenManage Client Instrumentation set up on a network that uses IT Assistant. For

information about Dell OpenManage Client Instrumentation, see the

Dell OpenManage Client Instrumentation User's Guide

available on the Dell Support website at

support.dell.com

Security

Содержание OptiPlex 320 DCNE

















































































































































































Результаты поиска

Содержание OptiPlex 320 DCNE

Отзывы:

Бренды по названию

Популярные бренды

Dell OptiPlex 320 DCNE, Руководство пользователя

Результаты поиска

Содержание OptiPlex 320 DCNE

Отзывы:

Бренды по названию

Популярные бренды