Dell OptiPlex 320 DCNE Скачать руководство пользователя страница 162

Страница: 162 / 176

Drives: Dell OptiPlex 320 User's Guide

file:///N|/For_lekha/For%20Deepa/Nadia/UG/A00/en/nadia-temp-working-jul19/Nadia_UG_A00/Output/dt_drive.htm[5/22/2015 10:44:07 AM]

Product Information Guide

CAUTION:

To guard against electrical shock, always unplug your computer from the electrical outlet before

removing the computer cover.

NOTICE:

To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as a

foam pad, that will sufficiently cushion it.

Removing a Hard Drive

1. If you are replacing a hard drive that contains data you want to keep, back up your files before you begin this

procedure.

2. Check the documentation for the drive to verify that it is configured for your computer.

3. Follow the procedures in

Before You Begin

NOTE:

Since the following steps do not require the complete removal of the CD/DVD drive and the floppy drive, it is

not necessary to disconnect the cables connecting the two drives.

4. Remove the CD/DVD drive from the bay and carefully set it aside (see

CD/DVD Drive

5. Remove the floppy drive from the bay and carefully set it aside (see

Floppy Drive

6. Press in on the two plastic securing clips on each side of the hard drive and slide the drive towards the back of the

computer.

NOTICE:

Do not pull the drive out of the computer by the drive cables. Doing so may cause damage to cables and the

cable connectors.

7. Lift the drive out of the computer and disconnect the power and data cables from the drive.

1 securing clips (2)
2 hard drive

Содержание OptiPlex 320 DCNE

















































































































































































Результаты поиска

Содержание OptiPlex 320 DCNE

Отзывы:

Бренды по названию

Популярные бренды

Dell OptiPlex 320 DCNE, Руководство пользователя

Результаты поиска

Содержание OptiPlex 320 DCNE

Отзывы:

Бренды по названию

Популярные бренды