Dell OptiPlex 320 DCNE Скачать руководство пользователя страница 144

Страница: 144 / 176

Desktop Computer: Dell OptiPlex 320 User's Guide

file:///N|/For_lekha/For%20Deepa/Nadia/UG/A00/en/nadia-temp-working-jul19/Nadia_UG_A00/Output/dt_about.htm[5/22/2015 10:43:57 AM]

6 cover release

latch

Use this latch to open the computer cover.

Back-Panel Connectors

parallel

connector

Connect a parallel device, such as a printer, to the parallel connector. If you

have a USB printer, plug it into a USB connector.

NOTE:

The integrated parallel connector is automatically disabled if the

computer detects an installed card containing a parallel connector configured

to the same address. For more information, see

System Setup Options

link

integrity

light

Green — A good connection exists between a 10-Mbps network and the

computer.

Orange — A good connection exists between a 100-Mbps network and

the computer.

Off — The computer is not detecting a physical connection to the

network.

network

adapter

connector

To attach your computer to a network or broadband device, connect one end

of a network cable to either a network jack or your network or broadband

device. Connect the other end of the network cable to the network adapter

connector on the back panel of your computer. A click indicates that the

network cable has been securely attached.

NOTE:

Do not plug a telephone cable into the network connector.

On computers with a network adapter card, use the connector on the card.

It is recommended that you use Category 5 wiring and connectors for your

network. If you must use Category 3 wiring, force the network speed to 10

Mbps to ensure reliable operation.

network

activity

light

This light flashes yellow when the computer is transmitting or receiving

network data. A high volume of network traffic may make this light appear to

be in a steady "on" state.

line-in

connector

Use the blue line-in connector to attach a record/playback device such as a

cassette player, CD player, or VCR.

On computers with a sound card, use the connector on the card.

line-out

connector

Use the green line-out connector to attach headphones and most speakers

with integrated amplifiers.

On computers with a sound card, use the connector on the card.

microphone

connector

Use the pink microphone connector to attach a personal computer microphone

for voice or musical input into a sound or telephony program.

On computers with a sound card, the microphone connector is on the card.

Содержание OptiPlex 320 DCNE

















































































































































































Результаты поиска

Содержание OptiPlex 320 DCNE

Отзывы:

Бренды по названию

Популярные бренды

Dell OptiPlex 320 DCNE, Руководство пользователя

Результаты поиска

Содержание OptiPlex 320 DCNE

Отзывы:

Бренды по названию

Популярные бренды