Dell OptiPlex 3020-Mini Tower Скачать руководство пользователя

Страница: 42 / 59

Option

Description

NOTE: This field is only relevant when the

Integrated NIC

control in

the

System Configuration

group is set to

Enabled with ImageServer

and when

Client DHCP

is set to

Static IP

Advanced

Specifies for Advanced debugging

•

Verbose Mode

(Disabled)

NOTE: This Option is only relevant when the integrated NIC control in
the System Configuration group is set to enable with Cloud Desktop.

Table 13. System Logs

Option

Description

BIOS events

Displays the system event log and allows you to clear the log.

• Clear Log

Updating the BIOS

It is recommended to update your BIOS (system setup), on replacing the system board or if an update is
available. For laptops, ensure that your computer battery is fully charged and connected to a power
outlet

Re-start the computer.

Go to

dell.com/support

Enter the

Service Tag

Express Service Code

and click

Submit

NOTE: To locate the Service Tag, click

Where is my Service Tag?

NOTE: If you cannot find your Service Tag, click

Detect My Product

. Proceed with the

instructions on screen.

If you are unable to locate or find the Service Tag, click the Product Category of your computer.

Choose the

Product Type

from the list.

Select your computer model and the

Product Support

page of your computer appears.

Click

Get drivers

and click

View All Drivers

The Drivers and Downloads page opens.

On the Drivers and Downloads screen, under the

Operating System

drop-down list, select

BIOS

Identify the latest BIOS file and click

Download File

You can also analyze which drivers need an update. To do this for your product, click

Analyze

System for Updates

and follow the instructions on the screen.

10.

Select your preferred download method in the

Please select your download method below

window

; click

Download File

The

File Download

window appears.

11.

Click

Save

to save the file on your computer.

12.

Click

Run

to install the updated BIOS settings on your computer.

Follow the instructions on the screen.

Содержание OptiPlex 3020-Mini Tower




























































Результаты поиска

Содержание OptiPlex 3020-Mini Tower

Отзывы:

Похожие инструкции для OptiPlex 3020-Mini Tower

Бренды по названию

Популярные бренды

Dell OptiPlex 3020-Mini Tower, Руководство пользователя

Результаты поиска

Содержание OptiPlex 3020-Mini Tower

Отзывы:

Похожие инструкции для OptiPlex 3020-Mini Tower

Бренды по названию

Популярные бренды