Dell OptiPlex 3020-Mini Tower страница 40 Скачать руководство пользователя | Manualshive

Страница: 40 / 59

background image

Option

Description

• Enabled in S5 only
•

Enabled in S4 and S5

Enabled

Fan Speed Control

Controls the speed of the system fan. This option is disabled by default.

NOTE: When enabled, the fan runs at full speed.

USB Wake Support

This option allows you to enable USB devices to wake the computer from
standby.

•

Enable USB Wake Support

- This option is enabled by default.

Wake on LAN

This option allows the computer to power up from the off state when triggered
by a special LAN signal. Wake-up from the Standby state is unaffected by this
setting and must be enabled in the operating system. This feature only works
when the computer is connected to AC power supply. The options differ based
on the form factor.

•

Disabled

- Does not allow the system to power on by special LAN signals

when it receives a wake-up signal from the LAN or wireless LAN.

•

LAN Only

- Allows the system to be powered on by special LAN signals.

•

LAN or PXE Boot

- Allows the system to be powered on by special LAN or

PXE Bootsignals. (For Ultra Small Form Factor only)

This option is Disabled by default.

Block Sleep

Allows you to block entering to sleep (S3 state) in OS Environment.
Default Setting:

Disabled

Intel Smart Connect

Technology

The option is disabled by default. If option enables will periodically sense

nearby wireless connection while the system is asleep. It will synchronize
emails or social media application that were open when system entered the
sleep state.

• Smart Connection

Table 9. POST Behavior

Option

Description

Numlock LED

Specifies if the NumLock function can be enabled when the system boots. This

option is enabled by default.

Keyboard Errors

Specifies whether keyboard related errors are reported when it boots. This

option is enabled by default.

Table 10. Virtualization Support

Option

Description

Virtualization

This option specifies whether a Virtual Machine Monitor (VMM) can utilize the

additional hardware capabilities provided by Intel Virtualization technology.

•

Enable Intel Virtualization Technology

- This option is enabled by default.

40

«
...
38
39
40
41
42
...
»

Содержание OptiPlex 3020-Mini Tower




























































Отзывы:

Нет отзывов

Похожие инструкции для OptiPlex 3020-Mini Tower

Бренд: IBM Страницы: 78

Бренд: IBM Страницы: 90

Бренд: IBM Страницы: 165

Бренд: Roland Страницы: 1

PC 300GL Type 6561

Бренд: IBM Страницы: 66

Бренд: Amiga Страницы: 113

Бренд: Uplift Desk Страницы: 2

Бренд: Uplift Desk Страницы: 2

Бренд: Cybernet Страницы: 69

BeoSound 4 2851

Бренд: Bang & Olufsen Страницы: 70

Бренд: Shuttle Страницы: 38

Бренд: Shuttle Страницы: 24

Бренд: REX controls Страницы: 15

Бренд: Janz Tec Страницы: 20

Бренд: Kano Страницы: 54

Бренд: AVERATEC Страницы: 88

Бренд: Portus Страницы: 4

Predator PO5-615s

Бренд: Acer Страницы: 42

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды