7.
Replace the jumper on the password jumper (PSWD) pins.
8.
Perform the procedure in
After Working on Your Computer
.
9.
Restart your computer and enter
Setup
(see
Entering the BIOS Setup Utility
).
10.
Assign new system and/or administrator password(s).
Clearing CMOS Settings
1.
Perform the procedure in
Before Working on Your Computer
.
2.
Reset the current CMOS settings:
a.
Locate the clear CMOS jumper (RTCRST) pins and the password jumper (PSWD) pins on the system board (see
System Board Connectors
).
b.
Remove the jumper from the password jumper (PSWD) pins and place it on the clear CMOS jumper (RTC_RST) pins.
c.
Wait 30 seconds.
d.
Remove the jumper from the clear CMOS jumper (RTC_RST) pins and place it onto the password jumper (PSWD) pins.
3.
Perform the procedure in
After Working on Your Computer
.
4.
Reboot your computer.
5.
Your computer will emit beeps, and then issue a
CMOS checksum error
. Press <F1> to continue.
Flashing the BIOS
The BIOS Setup Utility resides within the BIOS on the system board. If you install a new system board, you may need to update (or
flash
) the BIOS.
1.
Turn on the computer.
2.
Locate the latest BIOS update file for your computer at
support.dell.com
.
3.
Click
Download Now
to download the file.
4.
If the
Export Compliance Disclaimer
window appears, click
Yes, I Accept this Agreement
.
The
File Download
window appears.
5.
Click
Save this program to disk
, and then click
OK
.
The
Save In
window appears.
6.
Click the down arrow to view the
Save In
menu, select
Desktop
, and then click
Save
.
The file downloads to your desktop.
7.
Click
Close
if the
Download Complete
window appears.
The file icon appears on your desktop and is titled the same as the downloaded BIOS update file.
8.
Double-click the file icon on the desktop and follow the instructions on the screen.
NOTE:
This procedure enables the password feature. When you enter the BIOS Setup Utility, both system and administrator password options appear
as Not Set
—
meaning that the password feature is enabled but no password is assigned.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
The computer must be disconnected from the electrical outlet to clear the CMOS setting.
CAUTION:
When installing BIOS software, use only the BIOS software indicated for your computer.
Содержание OptiPlex 160
Страница 10: ...Back to Contents Page 1 peg 2 2 peg retainer 2 3 side cover hooks 2 4 side cover hook slots 2 ...
Страница 25: ...Back to Contents Page ...
Страница 41: ...Back to Contents Page ...
Страница 60: ......