end of this procedure to complete the installation.
2. Insert the
System Software
CD into the CD-ROM drive.
3. Click the
Start
button, then click
Run...
.
The
Run
dialog box appears.
4. Click the
Browse
button.
5. Select the appropriate drive for your CD-ROM.
6. Locate the
setup.exe
file for the DualPoint integrated pointing device driver for your specific operating
system. For example, if you want to install DualPoint integrated pointing device drivers for a system
running Windows NT, look under \winNT\touch\setup.
7. Click
OK
or press <Enter>.
8. Follow the instructions on your display.
9. After the files are copied to your hard-disk drive, click
Finish
.
10. Restart your computer to activate the DualPoint integrated pointing device drivers.
Installing MS-DOS® CD-ROM Drivers
CD-ROM drivers must be installed in order to use the MS-DOS CD-ROM utility. To install the CD-ROM
drivers, perform the following steps:
1. Save your work in all open application programs, because you will need to restart your computer at the
end of this procedure to complete the installation.
2. Insert the
System Software
CD into the CD-ROM drive.
3. Click the
Start
button, then click
Run...
.
The
Run
dialog box appears.
4. Click the
Browse
button.
5. Select the appropriate drive for your CD-ROM.
6. Locate the
setup.exe
file for the MS-DOS CD-ROM driver for your specific operating system. For
example, if you want to install MD-DOS CD-ROM drivers for a system running Windows NT, look under
\winNT\cdrom\setup.
7. Click
OK
or press <Enter>.
8. Follow the instructions on your display.
Содержание Latitude CPx H Series
