Dell Latitude 7310, Руководство по обслуживанию

Страница: 34 / 63

Steps
1. Disconnect the speaker cable from its connector on the system board.
2. Remove the speaker cables from the guide path.
NOTE: The speaker cable is secured with an insulation tape on the touchpad buttons.
3. Lift and remove the speakers from its slot on the palmrest assembly.
Installing the speaker
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the speaker and provide a visual representation of the installation procedure.
Steps
1. Connect the speaker cable to its connector on the system board.
2. Align and replace the right speaker into its slot in the palmrest assembly and route the speaker cable along the guide path.
NOTE: The speaker cable is secured with an insulation tape on the touchpad buttons.
Next steps
If you are replacing a component, remove the existing component before performing the installation procedure.
1. Install the:
a. Battery
b. Base cover
2. Connect the WWAN antennae cables .
3. Follow the procedure in After working inside your computer .
34 Removing and installing components