Dell Latitude 7310, Руководство по обслуживанию

Страница: 21 / 63

CAUTION: A thermal pad is included with the SSD plate and must always be adhered to the plate. If in the process of
replacing the SSD, the pad is separated from the plate or gets adhered to the SSD, technicians must re-adhere the
thermal pad to the SSD plate before re-installing the plate to the system.
NOTE: System will be reboot 2-3 times automatically within 1 min, after SSD/ WWAN card and battery cable is re-
connected.
Next steps
If you are replacing a component, remove the existing component before performing the installation procedure.
1. Connect the battery cable
2. Install the:
a. Base cover
3. RTC reset cycle
4. Follow the procedure in
After working inside your computer .
WWAN card
Removing the WWAN card
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the:
a. Base cover
3. Disconnect the battery cable
About this task
The following images indicate the location of the WWAN card and provide a visual representation of the removal procedure.
Removing and installing components 21