Dell Latitude 7310, Руководство по обслуживанию

Страница: 24 / 63

Table 2. WWAN antenna cable connection guide (continued)
Cable Pin Number Antenna Cable
7 Blue Auxiliary
8 Orange Auxiliary
3. Replace the WWAN bracket on top of the antennae cables.
4. Replace the single M2x2.5 screw securing it to the I/O board.
NOTE: System will be reboot 2-3 times automatically within 1 min, after SSD/ WWAN card and battery cable is re-
connected.
Next steps
If you are replacing a component, remove the existing component before performing the installation procedure.
1. Connect the battery cable
2. Install the:
a. Base cover
3. RTC reset cycle
4. Follow the procedure in
After working inside your computer .
WLAN antennae bracket
Removing the WLAN antenna bracket
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the:
a. Base cover
3. Disconnect the battery cable
About this task
The following images indicate the location of the WLAN antenna bracket and provide a visual representation of the removal procedure.
24 Removing and installing components