Dell Inspiron 8100 Скачать руководство пользователя страница 35

Страница: 35 / 60

Ensure that the slider is inserted so that the side with the two bumps is facing the back of the case, and the surface with the wear ribs is facing

the bottom of the case.

Hold the upper latch assembly in place while you snap the new latch button in from underneath the base, making certain the snap tabs are fully

engaged in the slider.

Ensure that the newly installed latch assembly moves smoothly and freely when pushed and released.

Battery Charger Board

Removing the Battery Charger Board

Follow the instructions in "

Preparing to Work Inside the Computer

Remove the

keyboard assembly

Remove the

hinge cover

Remove the

display assembly

Remove the

palm rest assembly

Lift out the video card.

Lift the battery charger board out of the system board connector.

Replacing the Battery Charger Board

Align the screw holes on the battery charger board with the screw holes on the bottom case assembly, and then press the battery charger board down into
its connector.

LED Board

NOTICE:

Disconnect the computer and attached devices from electrical outlets and remove any installed batteries.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface on the computer.

Содержание Inspiron 8100





























































Результаты поиска

Содержание Inspiron 8100

Отзывы:

Похожие инструкции для Inspiron 8100

Бренды по названию

Популярные бренды

Dell Inspiron 8100, Руководство пользователя

Результаты поиска

Содержание Inspiron 8100

Отзывы:

Похожие инструкции для Inspiron 8100

Бренды по названию

Популярные бренды