Removing the Hinge Cover
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Use a nonmarring tool to loosen the hinge cover at the back and at each side of the computer.
3.
Open the display and lift off the hinge cover.
Removing the Display Assembly
1.
Remove the
hinge cover
.
2.
Remove the M2.5 x 6-mm screw that secures the flex cable to the strain relief, and then use the pull loop to remove the flex cable from the video card.
NOTICE:
Disconnect the computer and attached devices from electrical outlets and remove any installed batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface on the computer.
