Dell Inspiron 7500 Скачать руководство пользователя

Страница: 29 / 165

The audio driver allows you to customize the sound features of your computer. To install the audio driver, perform the following steps:

Save and close any open files, and exit any open application programs.

Insert the

System Software

CD into the CD-ROM or DVD-ROM drive.

If the

Welcome to Windows 98

screen appears, click the

in the upper-right corner of the screen to close it and continue with the

installation.

Click the

Start

button, and then click

Run

In the

Run

dialog box, type

x:\win98\audio\setup.exe

, where

is the CD-ROM or DVD-ROM drive letter. The CD-ROM or DVD-

ROM drive letter is usually D.

Click

At the

Welcome

screen, click

Next

At the

Main Menu

, the

Upgrade Drivers

radio button is selected. Click

Next

The audio files are copied to your hard-disk drive.

When prompted, be sure that the

Yes, I want to restart my computer now

radio button is selected, and then click

Finish

The

New Hardware Found

window appears, the driver is installed, and the installation is completed.

Installing the

Video Driver

The video driver controls features such as video resolution and color palette. To install the video driver, perform the following steps.

Save and close any open files, and exit any open application programs.

Insert the

System Software

CD into the CD-ROM or DVD-ROM drive.

If the

Welcome to Windows 98

screen appears, click the

in the upper-right corner of the screen to close it and continue with the

installation.

Click the

Start

button, and then click

Run

In the

Run

dialog box, type

x:\win98\video\setup.exe

, where

is the CD-ROM or DVD-ROM drive. The CD-ROM or DVD-ROM

drive letter is usually D.

Click

When prompted to restart, click

Finish

. The computer restarts automatically.

Installing the

Touch Pad Driver

The touch pad driver controls features such as touch pad and mouse functions, scrolling, touch features, and sensitivity.

Save and close any open files, and exit any open application programs.

Insert the

System Software

CD into the CD-ROM or DVD-ROM drive.

If the

Welcome to Windows 98

screen appears, click the

in the upper-right corner of the screen to close it and continue with the

installation.

Click the

Start

button, and then click

Run

In the

Run

dialog box, type

x:\win98\touchpad\english\setup.exe

, where

is the CD-ROM or DVD-ROM drive letter.

NOTICE: Do not install the Japanese-language driver on a computer with a non-Japanese-language operating system.

NOTE: If you need to use extended video modes, check the documentation that accompanied the application program to determine if
the driver is provided. If it is not, contact the software manufacturer to get the necessary driver.

NOTE: After the computer restarts, you may change the video resolution.

NOTE: When you are promoted to select a directory, Dell recommends using the default directory settings.

Содержание Inspiron 7500






































































































































































Результаты поиска

Содержание Inspiron 7500

Отзывы:

Похожие инструкции для Inspiron 7500

Бренды по названию

Популярные бренды

Dell Inspiron 7500, Справочное руководство системы

Результаты поиска

Содержание Inspiron 7500

Отзывы:

Похожие инструкции для Inspiron 7500

Бренды по названию

Популярные бренды