Dell Inspiron 5405, Руководство по обслуживанию

Страница: 60 / 76

4. Install the 2230 solid-state drive or the 2280 solid-state drive in M.2 slot two. (if applicable)
5. Install the memory modules .
6. Install the 3-cell battery or 4-cell battery , whichever applicable.
7. Install the base cover .
8. Follow the procedure in After working inside your computer .
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
3. Remove the 3-cell battery or the 4-cell battery , whichever applicable.
4. Remove the 2230 solid-state drive or the 2280 solid-state drive from M.2 slot one.
5. Remove the 2230 solid-state drive or the 2280 solid-state drive from M.2 slot two. (if applicable)
6. Remove the wireless card .
7. Remove the fan .
8. Remove the coin-cell battery .
9. Remove the display assembly .
10. Remove the power-adapter port .
11. Remove the speakers (3-cell battery configuration) or speakers (4-cell battery configuration) , whichever applicable.
12. Remove the power-button with optional fingerprint reader .
13. Remove the touchpad .
14. Remove the I/O board .
15. Remove the system board .
NOTE: The system board can be removed along with the heat sink and memory.
About this task
After performing the steps in the pre-requisites, we are left with the palm-rest and keyboard assembly.
60 Removing and installing components