Steps
1. Place the system board on the palm-rest and keyboard assembly.
2. Replace the two (M2x3) screws that secure the system board to the palm-rest and keyboard assembly.
3. Connect the speaker cable to the system board.
4. Connect the touchpad cable to the system board.
5. Connect the keyboard-backlight cable to the system board.
6. Connect the keyboard cable to the system board.
7. Place the USB Type-C port bracket on the system board.
8. Align the screw holes on the USB Type-C port bracket with the screw holes on the system board.
9. Replace the two (M2x3) screws that secure the USB Type-C port bracket to the system board.
10. Adhere the tape that covers the USB Type-C port bracket.
11. Connect the I/O-board cable to the system board and close the latch.
12. Adhere the tape that secures the I/O-board cable latch to the system board.
13. Connect the fan cable to the system board.
14. Adhere the Mylar that covers the system board.
15. Connect the power-adapter port cable to the system board.
16. Adhere the tape that covers the power-adapter port cable connector on the system board.
17. Connect the display cable to the system board and close the latch.
18. Adhere the tape that secures the display-cable connector latch to the system board.
19. Push down the right display hinge, and align the screw holes on the display hinge with the screw holes on the system board.
20. Replace the two (M2.5x5) screws that secure the right display hinge to the system board.
Next steps
1. Install the
.
2. Install the
.
3. Install the
in M.2 slot one.
Removing and installing components
59