Steps
1. Place the 4-cell battery on the palm-rest and keyboard assembly.
2. Align the screw holes on the 4-cell battery with the screw holes on the palm-rest and keyboard assembly.
3. Replace the five screws (M2x3) that secure the 4-cell battery to the palm-rest and keyboard assembly.
4. Connect the battery cable to the system board and adhere the tape that secures the battery cable to the system board.
Next steps
1. Install the
.
After working inside your computer
.
Memory modules
Removing the memory modules
Prerequisites
Before working inside your computer
.
2. Remove the
.
About this task
NOTE:
Your computer may have up to two memory modules installed.
The following images indicate the location of the memory module and provide a visual representation of the removal procedure.
Removing and installing components
19
