Dell Inspiron 5160, Руководство по обслуживанию

Страница: 8 / 42

1. Align the pin-1 corner of the microprocessor module so that it points to the triangle on the system board, and insert the microprocessor module into the
ZIF socket.
When the microprocessor module is correctly seated, all four corners are aligned at the same height. If one or more corners of the module are higher
than the others, the module is not seated correctly.
2. Tighten the ZIF socket by turning the cam screw clockwise to secure the microprocessor module to the system board.
3. Wipe the thermal grease off of the microprocessor thermal-cooling assembly with a clean paper towel.
4. Squeeze all of the contents of the thermal grease packet (provided with the kit) on to the microprocessor thermal-cooling assembly.
5. Replace the microprocessor thermal-cooling assembly .
6. Replace the palm rest and then replace the display panel .
7. Replace the EMI shield and the button board .
8. Replace the keyboard .
9. Replace the hinge cover.
10. If you are installing a new microprocessor module with a different part number, update the BIOS using a flash BIOS update program CD.
Back to Contents Page
NOTICE: A microprocessor module that is not properly seated can result in an intermittent connection or permanent damage to the microprocessor and
ZIF socket.
NOTICE: Hold the microprocessor down while turning the cam screw to prevent intermittent contact between the cam screw and microprocessor.