Dell Inspiron 5160 Скачать руководство пользователя страница 40

Страница: 40 / 42

Follow the instructions in "

Turn the computer over, loosen the captive screw (labeled "C") in the modem/Mini PCI card cover, and lift the cover away from the computer.

Remove the two M2 x 3-mm screws securing the modem to the system board, and set them aside.

Pull straight up on the attached pull-tab to lift the modem out of its connector on the system board and disconnect the modem cable.

Installing the Modem

Connect the modem cable to the modem.

Align the modem with the screw holes, and press the modem into the connector on the system board.

Install the two M2 x 3-mm screws to secure the modem to the system board.

Replace the cover and tighten the captive screw.

Mini PCI Card

1 captive screw

2 modem/Mini PCI card cover

1 modem cable

2 M2 x 3-mm screws

3 modem cable connector

4 pull-tab

NOTICE:

The modem cable connector is keyed for correct insertion; do not force the connection.

Содержание Inspiron 5160











































Результаты поиска

Содержание Inspiron 5160

Отзывы:

Похожие инструкции для Inspiron 5160

Бренды по названию

Популярные бренды

Dell Inspiron 5160, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 5160

Отзывы:

Похожие инструкции для Inspiron 5160

Бренды по названию

Популярные бренды