Dell Inspiron 3580 Скачать руководство пользователя страница 102

Страница: 102 / 109

Secure Boot

Expert Key Management

Enable or disable Expert Key Management.

Custom Mode Key Management

Select the custom values for expert key management.

Table 8. System setup options—Intel Software Guard Extensions menu

Intel Software Guard Extensions

Intel SGX Enable

Enable or disable Intel Software Guard Extensions.

Enclave Memory Size

Set the Intel Software Guard Extensions Enclave Reserve Memory Size.

Performance

Multi Core Support

Enable multiple cores.
Default: Enabled.

Intel SpeedStep

Enable or disable Intel Speedstep Technology.
Default: Enabled.

NOTE:

If enabled, the processor clock speed and core voltage are adjusted

dynamically based on the processor load.

C-States Control

Enable or disable additional processor sleep states.
Default: Enabled.

Intel TurboBoost

Enable or disable Intel TurboBoost mode of the processor.
Default: Enabled.

HyperThread control

Enable or disable HyperThreading in the processor.
Default: Enabled.

Power Management

AC Behavior

Enables the system to turn on automatically, when AC power is supplied.

Enable Intel Speed Shift Technology

Enable or disable Intel Speed Shift Technology.

Auto On Time

Enable to set the computer to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays or Selected Days.
Default: Disabled.

USB Wake Support

Enable the USB devices to wake the computer from Standby.

Advanced Battery Charge Configuration

Enable Advanced Battery Charge Configuration from the beginning of the day to a
specified work period.

Primary Battery Charge Configuration

Set the primary battery charge settings with a preselected custom charge start and
stop.
Default: Adaptive.

POST Behavior

Adapter Warnings

Enable adapter warnings.
Default: Enabled.

Numlock Enable

Enables the NumLock funcltion when computer boots.

Fn Lock Options

Enable or disable the Fn lock mode.

Fastboot

Enable to set the speed of the boot process.

102

System setup

Содержание Inspiron 3580














































































































Результаты поиска

Содержание Inspiron 3580

Отзывы:

Похожие инструкции для Inspiron 3580

Бренды по названию

Популярные бренды

Dell Inspiron 3580, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 3580

Отзывы:

Похожие инструкции для Inspiron 3580

Бренды по названию

Популярные бренды