Dell Inspiron 3580 Скачать руководство пользователя страница 100

Страница: 100 / 109

General-System Information

Intel Smart Cache

Displays the Intel Smart Cache size.

HT Capable

Displays whether the processor is HyperThreading (HT) capable.

64-Bit Technology

Displays whether 64-bit technology is used.

Device Information

Primary HDD

Displays the primary hard drive information of the computer.

M.2 SATA SSD

Displays the M.2 SATA SSD device information of the computer.

M.2 PCIe SSD-0

Displays the M.2 PCIe SSD information of the computer.

LOM MAC Address

Displays the LOM MAC address of the computer.

Video Controller

Displays the video controller type of the computer.

dGPU Video Controller

Displays the discrete graphics information of the computer.

Video BIOS Version

Displays the video BIOS version of the computer.

Video Memory

Displays the video memory information of the computer.

Panel Type

Displays the Panel Type of the computer.

Native Resolution

Displays the native resolution of the computer.

Audio Controller

Displays the audio controller information of the computer.

Wi-Fi Device

Displays the wireless device information of the computer.

Bluetooth Device

Displays the bluetooth device information of the computer.

Battery Information

Displays the battery health information.

Boot Sequence

Displays the boot sequence.

Boot List Option

Displays the available boot options.

Advanced Boot Options

Enable Legacy Option ROMs

Enable or disable the Legacy Option ROMs.

Enable Attempt Legacy Boot

Enable or disable Legacy Boot.

UEFI Boot Path Security

Enable or disable the system to prompt the user to enter the Admin password when
booting a UEFI boot path from the F12 boot menu.

Date/Time

Displays the current date in MM/DD/YY format and current time in HH:MM:SS
AM/PM format.

Table 4. System setup options—System Configuration menu

System Configuration

Integrated NIC

Controls the on-board LAN controller.

Enable UEFI Network Stack

Enable or disable UEFI Network Stack.

SATA Operation

Configure operating mode of the integrated SATA hard drive controller.

Drives

Enable or disable various drives on board.

SMART Reporting

Enable or disable SMART Reporting during system startup.

USB Configuration

Enable Boot Support

Enable or disable booting from USB mass storage devices such as external hard drive,
optical drive, and USB drive.

100

System setup

Содержание Inspiron 3580














































































































Результаты поиска

Содержание Inspiron 3580

Отзывы:

Похожие инструкции для Inspiron 3580

Бренды по названию

Популярные бренды

Dell Inspiron 3580, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 3580

Отзывы:

Похожие инструкции для Inspiron 3580

Бренды по названию

Популярные бренды