Dell Inspiron 3472 Скачать руководство пользователя страница 69

Страница: 69 / 82

System setup

NOTE: Depending on the computer and its installed devices, the items listed
in this section may or may not be displayed.

Boot Sequence

Boot Sequence allows you to bypass the System Setup–defined boot device order
and boot directly to a specific device (for example: optical drive or hard drive). During
the Power-on Self Test (POST), when the Dell logo appears, you can:

•

Access System Setup by pressing F2 key

•

Bring up the one-time boot menu by pressing F12 key

The one-time boot menu displays the devices that you can boot from including the
diagnostic option. The boot menu options are:

•

Removable Drive (if available)

•

STXXXX Drive

NOTE: XXX denotes the SATA drive number.

•

Optical Drive (if available)

•

SATA Hard Drive (if available)

•

Diagnostics

NOTE: Choosing Diagnostics, will display the ePSA diagnostics screen.

The boot sequence screen also displays the option to access the System Setup
screen.

Navigation keys

NOTE: For most of the System Setup options, changes that you make are
recorded but do not take effect until you restart the system.

Содержание Inspiron 3472



















































































Результаты поиска

Содержание Inspiron 3472

Отзывы:

Dell Inspiron 3472, Руководство по обслуживанию, Страница: 69 / 82

Результаты поиска

Содержание Inspiron 3472

Отзывы: