Replacing the 2.5-inch hard drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
.
Procedure
1
Slide the hard drive into the hard-drive bracket.
2
Align the screw holes on the hard drive with the screw holes on the hard-drive
bracket.
3
Replace the four screws (M3xL3.5) that secure the hard drive to the hard-drive
bracket.
4
Slide the hard-drive assembly towards the back of the slot on the drive cage until
it snaps into place.
5
Align the screw holes on the top hard drive with the screw holes on the hard-
drive bracket.
6
Replace the screw (#6-32xL3.6) that secures the hard-drive assembly to the
drive cage.
7
Connect the data cables and power cables to the hard-drive assembly.
Post-requisites
Replace the
.
26
Содержание Inspiron 3472
