Dell Inspiron 14 7000 Series, Руководство по обслуживанию

Страница: 63 / 90

Replacing the Heat Sink
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
CAUTION: Incorrect alignment of the heat sink can cause damage to
the system board and processor.
NOTE: The original thermal grease can be reused if the original system
board and heat sink are reinstalled together. If either the system board
or the heat sink is replaced, use the thermal pad provided in the kit to
make sure that thermal conductivity is achieved.
Procedure
1 Align the screw holes on the heat sink with the screw holes on the
system board.
2 In sequential order (indicated on the heat-sink), tighten the captive
screws that secure the heat sink to the system board.
Post-requisites
1 Replace the system board .
2 Replace the fan .
3 Replace the palm rest .
4 Replace the keyboard .
5 Replace the optical drive .
6 Replace the base cover .
7 Replace the battery .
63